|
- Lowers bike 1 inch, 1-1/2 inch, 2 inch
- CNC Machined
- Black Anodized
- Electra Glides, Road Glides, Street Glides & Road Kings
- Kits available for front forks
- Combination kit available
- Kickstand wedge kits
- Lowered Kickstand,
Touring
- Kickshoe for soft ground or asphalt
|
|
|
|
|
|
|
|
|
|
Lowering Kit for Touring models, 2002 - current (2 inch)
|
|
|
|
Adjustable Lowering Kit for 2002 - 2013 (1 - 2 inch)
|
|
|
|
Lowering Kit for 2002 - current (1 inch)
|
|
|
|
Lowering Kit for 1997 - 2001 (1
Inch)
|
|
|
|
Lowering Kit for 1985 - 1996 (1-1/2
Inch)
|
|
|
|
|
|
|
|
Front Fork Lowering Kit, Model year 2017+ Touring Models |
|
|
|
Low Profile Premium Ride Fork Lowering Kit |
|
|
|
Fork Lowering Kit (adj. 1"), MY '09 |
|
|
|
Fork Lowering Kit (adj. 1"), MY '09 |
|
|
|
Fork Lowering Kit (adj. 1"), MY '06 - '08 |
|
|
|
Fork Lowering Kit (adj. 1" to 2"), MY '80 to '09,
(non cartridge models)
|
|
|
|
Fork Lowering Kit (adj. 1" to 2"), MY '02 - '05, (left
fork cartridge models)
|
|
|
|
|
|
|
|
Combo Front/Rear Lowering Kit (adj. 1" to 2"),
MY '80 to '99
|
|
|
|
|
|
|
|
|
|
|
|
Kickstand Wedge Kit for MY '81 - '08 |
|
|
|
Kickstand Wedge Kit for Early MY '36 - '99 |
|
|
|
1" Lowered Kickstand, MY '07 to current
Touring Bikes
|
|
|
|
|
|
|
|
|
|
|
|
Kick Shoe for MY '07 to current |
|
|
|
Kick Shoe for MY '06 and older |
|
|
|
|
|
|
|
|
|
|
|
|
|
LK-AB:Lowering Blocks kit for Harley-Davidson Touring models 2002
to current. Simply attach to the existing suspension holes with factory screws and provided screws- 2 inch lowering links
- Aircraft grade aluminum alloy
7075 machined
- Thicker design to provide more strength than most others
on the market
- Does not fit Legends Revo-A shocks
- Black Anodized
- Our blocks are thicker
to provide more strength than most others on the market
Note: Will
not work with air ride suspension.
LK-01: This adjustable lowering kit will
install in 15 minutes to adjust your bike 1"-2" lowered. Powder coated. Fits:
'02 to '13 Road Glide, Electra Glide, Ultra Glide, Road King (w/hard bags), Street Glide.
LK-52: Lowers your FL 1" leaving adequate room
for stock tire to fender clearance and is designed to retain the use of the stock rubber shock boot. Makes the motorcycle
much easier to get off the side stand and gives more rider control over the motorcycle with its lower center of gravity. CNC
machined from billet aluminum with a black finish. Designed to be used with OE shocks. Saddlebag modifications are necessary
for installation on FLHRC models. Installs in about 30 minutes with common tools and includes instructions & hardware.
Black Finish Brackets. Fits FL models 2002 and later. LK-53: Lowers your FL 1" leaving adequate room for stock tire to
fender clearance and is designed to retain the use of the stock rubber shock boot. Makes the motorcycle much easier to get
off the side stand and gives more rider control over the motorcycle with its lower center of gravity. CNC machined from billet
aluminum with a black finish. Designed to be used with OE shocks. Saddlebag modifications are necessary for installation on
FLHRC models. Installs in about 30 minutes with common tools and includes instructions & hardware. Black Finish Brackets.
Fits FL models 1997-2001. LK-26: Reduces the rear ride height by repositioning the lower shock mount
further back. More economical than buying shorter rear shocks. Easy to install. Includes installation instructions and all
required hardware. Black Finish, - 1 -1/2" Ride Height. Fits FLH & FLT 1985/1996 (Air Shock models). Special Note:
Some models require modification to the saddlebag mount for sufficient clearance.
HD-36: Front fork lowering kit. Lowers 1" or 2",
49MM 10-1571. Fits - 2017 and Later Touring Models.
HD-57: The Cartridge Fork Kit complements the Premium Ride Hand-Adjustable
Rear Shocks (Low Profile and Standard-Height) by providing a balanced suspension system capable of delivering superior ride
characteristics. The front fork kit improves resistance to front brake dive, improves cornering and enhances bottoming control.
Kit includes fork pipes, cartridges, fork bolts, main springs and oil seals. Lowers front of bike by ~1". Fits '14-'16
Touring models. Does not fit Trike models. Stock on '15-'16 FLHTCUL and FLHTKL models. Must only be installed on vehicles
equipped with lowered rear shocks. HD-64:
1" front fork owering Kit. Fits '09 Touring models (except FLHR, FLHRC, FLTRSE3, FLHTCUTG and Police models). Must only
be installed on bikes equipped with lowered rear end. Can be installed on FLHX models with original equipment rear shocks. HD-75: 1" front fork loweirng kit. Fits '09 Road King models. Must
only be installed on bikes equipped with lowered rear end.
HD-28: 1" front fork lowering kit. Fits '06-'08 Touring models
(except Road King or Police models.) Must only be installed on bikes equipped with lowered rear end. Can be installed on FLHX
models with original equipment rear shocks.
MC/MU-03/53: The ultimate time saver! new Drop In™
Fork Lowering Kit turns a tedious undertaking into a half hour job. Front Fork Lowering kit can take up to 2" out of
the front endall without disassembling the forks, removing the wheel, or changing the fork oil. No special tools needed for
installation. Kit includes shorter fork springs, secondary compensator springs, pvc spacers (used on Dyna only), and instructions.
Pull up to two inches out of the front end of your bike without the hassle of disassembling the forks or even changing out
the oil. Whats even better, is that the whole process can be done with basic tools. Drop In Lowering Kit 80-09 FLH/FLT
(Non Cartridge Models).
MC-04: Forget everything you know about lowering motorcycle front ends,
Pull up to two inches out of the front end of your bike without the hassle of disassembling the forks or even changing out
the oil. Whats even better, is that the whole process can be done with basic tools. Drop In Lowering Kit 02-05 FLH/FLT (Left
Fork Cartridge).
SL-1004: The new SL-1004 is a combination of dropped fort springs and
stubby shocks wrapped up in one easy to install package. FLH requires fork legs to be slid down to access cap, but leg
does not have to be disassembled. Drops from 1" to 2".
BK-01:
Lesson the lean angle on your bike; make it easier to lift off the kickstand! Or if you are running some extra tall shocks
or front forks your bike may experience an excessive angle when leaned over on the kickstand. This kickstand lift block can
help eliminate this issue. It bolts directly to the bottom of your kickstand with the supplied hardware and adds 1" to
the height of the kickstand. You just mark your kickstand with the supplied template, drill the two mounting holes and install
it in place. - Made of billet 6061-T6 aluminum
- Cut to match the kickstand contour of most factory kickstands
- Hardware supplied
- Sold as a kit
WK-1-1: Kickstand Wedge Kit allows you to change the angle of
your kickstand at the frame for lowered bikes. It maintains the original angle of the foot board.
Made of 6061 billet aluminum construction. Includes both fine and coarse thread bolts for
early and late models and installation instructions. Fits '81 - '08 for bikes lowered up to 2". WK-1-1E:
It is ideal that when you lower your bike you change the angle at which your kickstand rests. This must have item for a lowered
bike puts your kickstand at the the proper orientation to prevent your bike from tipping over. For our older model Harley
lowering kits. Fits '36-'99 Big Twin Models. ANT-11-22: A must when lowering a Touring model. Chrome plated forged steel. JS-72: Jiffy Stand
Extension kits have been ergonomically designed to simplify the deployment and retraction of the jiffy stand. The extension
is shaped to simplify locating the tab with your boot, and aid in swinging the jiffy stand into position. Kit mounts to Original
Equipment jiffy stand. Includes all required mounting hardware. Fits Touring models 1991/Later. Mounts to flat lower section
of kick stand. JS-33:
Jiffy Stand Extension kits have been ergonomically designed to simplify the deployment and retraction of the jiffy stand.
The long extension is shaped to simplify locating the tab with your boot, and aid in swinging the jiffy stand into position.
The move feels natural, and adds confidenc when parking your motorcycle in a tight spot. Kit mounts to Original Equipment
jffy stand, and includes all required mounting hardware. Fits '84-later Touring (except Trike)
and '86-'06 Softail® models (except '05-'06 FLSTN). Kickshoe: Have you had your bike drop because your jiffy stand gave
way on soft ground or gravel? Are you tired of spending 10 minutes and contorting your body trying to maneuver your coaster
under your kickstand? Concern for my ride dropping because of soft ground or hot asphalt had me digging into my bags trying
to find that illusive coaster/pad/puck thing - only to then spend another 10 minutes trying to get it under the jiffy stand
without dropping my bike myself! The KickShoe™ is designed to stabilize your bike when parked on uneven or soft
surfaces. The product, as pictured, stays on your bike without any drilling of the kickstand. And not only is the top
plate attached with screws and adhesive, the product is held on the kickstand with a binding bolt that goes through from one
side to the other w/black ends. This makes it easier to attach and makes for a sturdier product. Made of black polycarbonate, black ABS, and polished aluminum.
The Binding Pin is Stainless Steel. Installs in 5 minutes. It stays on, but then can be removed quickly if needed. Designed
to give stability to your jiffy stand with its wider, thicker surface. The base is black polycarbonate which won't scratch
your garage floor and yet is strong to withstand sitting on many surfaces and will resist scratching. Made in USA. NOTE: If you have had your bike LOWERED - this product may not
work on your bike! KS-07:
For touring models '07 to current. KS-06:
For touring models '06 and older. KP-46:
Kickstand bumper...high quality, long lasting rubber pad, complete with adhesive backing to protect the primary cover from
the return of the kick stand. No more clunk when putting up the kickstand.
KS-72: Engineered to shroud the lower portion of your bike frame, this distinctive chrome-plated cover hides the kickstand
assembly, front engine stabilizer and the footboard mount. Instantly simplifies a usually unsightly area of the bike. Fits: ’91-’16
Electra Glides, Road Kings, Road Glides, Street Glides, Tour Glides & '09-'13 Trikes. KS-97: Similar to above but fits: 91-'08 Touring Models Without Fairing Lowers Or Oil Coolers.
|
 |
|
Lowering Kits:
|
| LK-AB Lowering Kit Touring Models |
|
| LK-01 Adjustable Lowering Kit |
|
| LK-52 1" Lowering Kit |
|
| LK-53 1" Lower Kit |
|
| LK-26 1-1/2" Lowering Kit |
|
| HD-36 Front Fork Lowering Kit |
|
| HD-57 Low Profile Premium Ride Fork Kit |
|
| Lowering Kit for Front Forks |
|
| SL-1004 Front and Rear Lowring Combination Kit |
Kickstand Accessories:
|
| BK-01 Kickstand Lift Block |
|
| BK-01 Kickstand Lift Block |
|
| BK-01 Installed on Dyna |
|
| Kickstand Wedge Kit |
|
| WK-1-1E for Early Model Year Bikes |
|
| ANT-3291 Lowered Kickstand |
|
| JS-72 Kick Stand Extension |
|
| JS-72 Kick Stand Extension |
|
| JS-33 Kick Stand Extension kit |
|
| Kick Shoe for Touring Bikes |
|
| KS-07 Kick Shoe for MY 2007 to current models |
|
| KS-07 Kick Shoe for MY 2007 to current models |
|
| KS-06 Kick Shoe for MY 2006 and older models |
|
| Kick Shoe now updated to secure w/screws |
|
| KP-46 Kickstand Pad |
|
| KP-46 Kickstand Pad |
|
| KS-72 Lower Front Frame Cover |
|
| KS-97 Lower Front Frame Cover |
|
|
|
|
|
|
|
|
