|
Saddlebag Extensions
Extended Saddlebags Designed for Dual Exhaust Set
includes bags & lids. All mounting holes match stock locations.
Re-use stock hardware for a true bolt-on experience Raw finish Molded with highly
polished tooling Minimal prep required before priming
& paint Readily accepts our Lid Accents
|
|
|
|
|
|
|
|
|
|
Chrome Saddlebag Extensions, Chrome, LED |
|
|
|
Chrome Saddlebag Extensions, Gloss Black,
LED
|
|
|
|
Chrome Saddlebag Extensions |
|
|
|
Gloss Black Saddlebag Extensions |
|
|
|
|
|
|
|
Stretched Saddlebag Bottom Set |
|
|
|
Extended & Oversized Saddlebags |
|
|
|
|
|
|
|
Wear Plate (sold individually) |
|
|
|
Fairing Factory Hinge/Latch/Hardware Kit |
|
7292: Chrome L.E.D. Saddlebag Extensions. What's better than the
look of extended saddlebags? Extended saddlebags with wrap around auxiliary run and turn signal lights built in! Available
in chrome with red lenses or black with smoked lenses (black can be custom painted), these saddlebag extensions bolt on securely
and feature plug-n-play wiring for installation ease. The inward curved bottom edge gives these unique styling while reducing
cornering interference often seen with other saddlebag extensions. Fits: '14 Electra Glides, Street Glides & Road Kings
(except '14 FLHRSE). 7293: Similar to above but in Gloss
Black.
7272: What's better than the look of extended saddlebags?
Extended saddlebags with wrap around auxiliary run and turn signal lights built in! Available in chrome with red lenses or
black with smoked lenses (black can be custom painted), these saddlebag extensions bolt on securely and feature plug-n-play
wiring for installation ease. The inward curved bottom edge gives these unique styling while reducing cornering interference
often seen with other saddlebag extensions. Fits: '93-'13 Electra Glides, '06-'13 Street Glides (except '10-'12 FLHXSE), '98-'13
Road Glides (except '09 FLTRSE & '12 FLTRXSE), 94-'13 Road Kings with Hard Saddlebags (except '13 FLHRSE), '93-'96 Tour
Glides. 7273: Same as above but in gloss black and smoke
lenses (can be custom painted).
VT-49: Stretch
saddlebag bottom set includes right and left side with black unfinished surface for dual exhaust models. For riders looking
to keep stock bags complete or for converting from leather covered bags. Bottoms are 2" deeper in the front than stock
and 3" deeper in the rear for the stretched look. Will fit perfectly with any mounting holes that match the stock location.
Installer may re-use stock hardware for a true bolt-on experience. Bags feature a raw finish and are made from thick ABS plastic
injection-molded with highly polished tooling, this process creates a solid construction, clean body lines, and smooth surfaces
inside and out which require minimal prep for primer and paint. Set includes bags only. Order lids separately. Complete hinge,
latch, and hardware kit is also available separately if needed. All pieces are constructed of black fiberglass and reinforced
FRP plastic, ready for primer and paint. FRP is made up of polyphenylene oxide/polyamide alloy. Fits: 2014-UP
CON-270: Extended Oversized bags are 4" wider and
6" longer than stock saddlebags. Six layers of 2.0 oz. mat fiberglass with on layer of 10 oz. cloth. The bags are made
in a vacuum mold so there are no seams (plus an extra strip of 2.0 oz. rope mat around th top edge of the bag to make the
top edge extra strong. Gel coat finish inside and out. Fat lid gives a very fat look from top and back. Bags are as wide as
the crash bars on your bike so you can still split lanes west coast style. Limited OEM warranty. Bags come easy to prep.
5396: Hands down, these are the best saddlebags available! Sturdy,
injection molded ABS construction ensures perfect fit & the extended portion provides extra usable storage space.
Features: - Designed for Dual Exhaust
- Set includes
bags & lids. All mounting holes match stock locations. Re-use stock hardware for a true bolt-on experience.
- Raw finish – Molded with highly polished tooling so minimal prep required before
priming & paint
- Readily accepts our Lid Accents (P/N’s 8646,
8647, 7764)
- If reusing existing stock hardware, requires 4 wear plates WP-962
- sold separately.
Fits: '93 - current Touring Models. 5399: Complete Hinge/Latch/Hardware Kit available separately for Road King
riders converting from leather covered bags or for customers wishing to keep their stock bags complete.
|
 |
|
Extensions
|
| 7292 Saddlebag Extensions |
|
| 7272 Chrome Saddlebag Extensions |
|
| 7272 Chrome Saddlebag Extensions |
|
| 7272 Chrome Saddlebag Extensions |
|
| 7273 Black Saddlebag Extensions |
|
| 7273 Black Saddlebag Extensions |
|
| 7273 Black Saddlebag Extensions |
Saddlebags
|
| VT-49 Stretch Saddlebag Bottom Set |
|
| VT-49 Stretch Saddlebag Bottom Set |
|
| VT-49 Stretch Saddlebag Bottom Set |
|
| CON-270 Oversize & Extended Saddlebags |
|
| CON-270 Oversize & Extended Saddlebags |
|
| 5396 Extended Saddlebags |
|
| 5399 Fairing Factory Hinge/Latch/Hardware Kit |
|
|
|
|
|
|
|
|
